Loading... Please wait...
  • Hcigar king mod clone
  • Hcigar mod clone
  • Surefire King Clone
  • Surefire King Mod
  • King Mod
  • Surefire mod
  • Hcigar King Clone
  • King mod clone
  • Hcigar mod
  • Hcigar Clone

HCigar King Mod

Retail Price: $39.99
$29.99 (You save $10.00)
Brand:
Customer Rating:
Product Availability:
In Stock
Quantity:

Product Description

Introducing the 'King Mod' by HCigar
 
 Due to the Amount of Emails We Received from our Loyal Customers Requesting this Mod, As Always, We Listened!
 
The main 18350 tube of the King Mod features the signature Lion logo laser engraved on the front of the mod. On the back portion of it's polished stainless steel tube body the word “KING” has also been laser engraved. And of course, just like any exclusive high-end mod, each of the H-Cigar King mods have an individualized serial number laser engraved at the base of the 18350 tube directly under the Lion engraving. Now let's stop a minute a talk about the H-Cigar laser engravings on the King mod. This King Mod by far has one of the deepest engravings we have felt yet. If you've ever held a real King Mod, you will know how deep the engravings are. HCigar has matched that depth on the true King Mod engravings to a T!
 
The King mod comes with a total of 3 battery tubes to be able to easily change the length of your device and to accommodatean 18350, 18490 or 18650 battery. The King mod comes equipped with stainless steel top and bottom firing pins that emulate the same design as the outer rings. The positive pin is a two-piece design that allows you to independently adjust the pin to eliminate any extra battery play in the mod. The top and bottom rings on the King mod have an octagonal design which is very convenient when laying your mod down. The octagonal top and bottom rings prevent the mod from rolling when it’s laid on its side. The King’s top cap features 4 air holes that have been
strategically placed to allow maximum airflow. The top cap is completely adjustable and allows you to easily fine-tune the amount of air flow, it also features an o-ring to seal off any air if you decide to use the mod with the air holes closed.  The bottom button has an exquisite switch that easily fires as it was contoured to sit perfectly in your hand. It also has the Surefire logo laser etched on the bottom as well.  The firing button has a locking option to allow the mod from autofiring. Simply twist the bottom locking ring to prevent any accidental firing when not in use. Please Note this is a 1:1 Clone. Others who see it will probably mistake this for the REAL DEAL. Enjoy!
 
 
Don't Want to Read Our Review Above? Here's the King Mod Facts and Features;
  • 100% Polished Stainless Steel Body or 100% Brass Body
  • No Circuit Board (True Mechanical Mod)
  • Laser Etched Engravings and Logo
  • Laser Etched Engraved Individual Serial Number
  • Silver-Plated Adjustable Firing Pin
  • Silver-Plated Dual Adjustable Atomizer Contact Pin
  • Adjustable Air Flow Control Ring With O-Ring
  • Octagonal Top & Bottom Rings to Prevent Rolling When Laid Down
  • Bottom Firing Button with Threaded Locking Ring
  • 3 Polished Stainless Steel Tubes for 18350, 18490, and 18650 Batteries 
  • 510 Atomizer Connection 
  • 1:1 Exact Clone Design
 
General Tips 
  • Always Insert the Positive Side of the Battery into the tube FIRST! So if your mod was sitting on a table, the positive side of the battery would be facing up and the negative side of the battery should be facing down towards the button (Just like any mod, failing to properly insert your battery will kill your mod)
  • Always Use Protected Batteries from Reputable Brands Such as AW or eFest. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment. If your mod is not firing and you ARE NOT using AW or eFest Batteries, this IS the reason!
  • Always use a kick chip when running unprotected batteries
  • Never stack batteries
  • Prior to using your King mod, we suggest cleaning the contact pin, firing pin, tube threads, as well as the inside of all of the tubes. To clean simply remove the contact pin from the mod and thoroughly clean the contact pin, firing pin, threads, and inside of the mod tubes with a microfiber towel and standard rubbing alcohol to remove the manufacturing oil which will decrease the conductivity (aka decrease the resistance/drop voltage)

 

Warranty Information

This item is for advanced users only. Each one has been inspected to be cosmetically defect-free and in working condition. We also disassemble each mod to ensure all of the hardware, springs, pins, etc are perfect and are included. Each mod has been hand polished, therefore, it is normal for slight swirls and/ or the occasional slight imperfections to be visible on these mods due to their hand finish. This same thing goes for every mod out there including the genuine version of these mods as well. As many of you advanced users know, if a mod is truly hand polished, then occasionally they will have slight imperfections. For those of you who are new to mechanical mods you will also see this same disclaimer on most all of the genuine mod manufacture's official websites. Please be advised it does not affect the performance or operation ability of the mod in any way, and for these reasons we will not accept returns or exchanges.

This product does not have a manufacture warranty against manufacture defects as it does not contain a circuit board that can fail, therefore, for this item, all sales are final. For more information please see our Terms & Returns Page. Feel free to ask us any further questions regarding this product by using our Contact Us page.

Find Similar Products by Category

Product Reviews

Write your own product review

Showing reviews 1-5 of 29 | Next

  1. great

    Posted by Jeremy Horne on 21st Jun 2014

    This is a awesome clone. Threads are smooth. Adjustable 510 and battery pins. Button is nice. Everything connects flush no Bart rattle. Highly recommend.


  2. WAY fast service.

    Posted by Unknown on 18th Jun 2014

    I ordered the King mod at around 1 or 2pm on Friday, June 13th, it was processed and shipped that same day. I recieved my order on Monday, June 16th. Fast and prompt service, thankyou.

    I ordered this for the topcap and firing pin/cap to go on my hammer mod. Can only say it works like a champ now.

    I will be more than happy to order items in the future from these guys.


  3. Works good

    Posted by Trevor on 1st Jun 2014

    First mod. First clone. I wouldn't know the difference if both are in frog of me. All threads are nice and clean. Everything connects nicely. Lock ring is sometimes difficult to unscrew without base unscrewing. I am very happy with it. Fires everytime.


  4. Great Mod

    Posted by Unknown on 5th May 2014

    Arrived in good working order. Solid device. Do not hesitate to purchase this one...hits like a champ.


  5. Great Mod

    Posted by Unknown on 5th May 2014

    Arrived in good working order. Solid device. Do not hesitate to purchase this one...hits like a champ.


Showing reviews 1-5 of 29 | Next




Newsletter


Connect with us
  • Instagram
  • FacebookRSS