Sorry but this item is currently unavailable.
Please check back at a later stage.
Cartomizer and atomizer ohm readers are essential for any vaper who is
using rebuildable atomizers. Our ohm readers come fully assembled and are
NOT a DIY Kit. These devices allow you to easily test cartomizers and
atomizers without having to use a multi meter. To test the ohms of
your build simply screw on a cartomizer or atomizer and this tester
will show you the ohms. This is a great tool for testing ohms for bad
cartomizers or atomizers. The ohm meter will read a 1 in the first
digit to the left if there is no current flow through the device.
These devices are accurate to +-0.2% and will read from 0.01 to 9.99
ohms. Our ohm readers will work on any atomizer or cartomizer that has
a 510 or a 901/808 connection. Extensions or adapters can be used to
test other atomizers or cartomizers as well as eGo style atomizers and
These devices require 2 AA batteries which are not
This item item has been voltage tested, and inspected to ensure the battery holds a charge, and charges with the charger that will be sent out in the kit. Every item prior to shipping is inspected to cosmetically defect-free and in perfect working condition. This Product has a 15 Day Manufacture Warranty against manufacture defects on the battery only as other items do not contain a circuit board that can fail. Please note, we do not accept returns and only accept exchanges on batteries for manufacture defects only for sanitary & hygienic purposes. For more information please see our Terms & Returns Page. Feel free to ask us any further questions regarding this product by using our Contact Us page.
Posted by Ronen Edelman on 15th Dec 2014
Great ohm reader, works perfectly fine. Jumps a lot between the ohms sometimes, but if you know how to do it right you can figure out the right ohm level. DO NOT build on it. DO NOT twist the rda too hard on it. It's very fragile. To read your ohm level simply screw it in gently til it's hard (but not too hard) and turn the reader on. That should be the right ohm. Again, whatever you do, DO NOT twist hard onto it.
Posted by Unknown on 15th Oct 2014
Tested it with single and dual coil on all 4 atomizers I had. Compared it to my friends oracle ohm reader and they were the exact same every time, deff worth the money and works perfect for me
Posted by brandon on 13th Aug 2014
I used 2 use a regular multi meter was a pain in the a** but with this its easy 2 use its accurate and works great as a build base so I'm glad I got this
Posted by Christopher Cooper on 1st Aug 2014
This works as intended. Seems to be accurate with everything i'v done so far. Only problem is if your Atomizer is screwed on too tight it will give false readings.. just need to make sure it's on snug and not too tight. Otherwise, A must need for someone like me.
Posted by Unknown on 20th Feb 2014
Great ohm reader. Checked it against a calibrated fluke multi meter And it was spot on. Nice bright LCD display. Compact. Will recommend.